{ "schema_version": 1, "inputs": { "scene": "/Users/jang/Products/design-os-3d-blender/builds/reference-keyboard/runs/presentation-B03/steps/presentation/attempt-0001/keyboard.blend", "spec": "/Users/jang/Products/design-os-3d-blender/builds/reference-keyboard/spec-B.json", "scene_sha256": "de2251261c7d1c17c4150dd3cccc6e42f5a146036916d223801882c4f61c8e16", "spec_sha256": "fdcff5dae9873e3db9093780ed729e4e3045714723ffc6b43e5b98d450170434" }, "checker": { "version": "1.0.1", "blender": "5.2.0 LTS" }, "units": "mm", "parts": [ { "id": "RK_BASE", "object": "RK_BASE", "measured": { "non_manifold_edges": 0, "non_contiguous_edges": 0, "wire_edges": 0, "loose_verts": 0, "zero_area_faces": 0, "self_intersection_pairs": 0, "shells": 1, "signed_volume_mm3": 55296.01988446546, "surface_area_mm2": 57015.58033725619, "triangle_estimate": 1962, "sample_non_manifold_edges": [], "sample_self_intersections": [], "bbox_dims_mm": [ 284.0, 92.0, 4.0 ], "bbox_deviation_mm": [ 0.0, 0.0, 0.0 ], "object_scale": [ 1.0, 1.0, 1.0 ], "object_delta_scale": [ 1.0, 1.0, 1.0 ], "unit_system": "METRIC", "scale_length": 1.0, "bed_volume_mm": [ 320.0, 200.0, 100.0 ], "footprint_mm": [ 284.0, 92.0, 4.0 ], "brim_margin_mm": 5.0, "wall_ray_samples": 2252, "wall_min_mm": 1.995703322982788, "wall_p01_mm": 1.9957198930740356, "overhang_area_pct": 45.69430737431232, "orientation_up": "+z", "max_overhang_deg": 45.0, "features": { "mount0": { "measured_diameter_mm": 3.3983887135982513, "probes": { "+1": { "axial_mm": null, "surface_mm": 10.0 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "ring_hits": 24, "ring_min_r_mm": 1.6991853713989258, "ring_max_r_mm": 1.6992098093032837, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -1.0, "projected_max_mm": 3.0, "approach_mm": 10.0, "ray_length_mm": 24.0 } }, "mount1": { "measured_diameter_mm": 3.398388663927714, "probes": { "+1": { "axial_mm": null, "surface_mm": 9.999999046325684 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "ring_hits": 24, "ring_min_r_mm": 1.6991853713989258, "ring_max_r_mm": 1.6992098093032837, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -1.0, "projected_max_mm": 3.0, "approach_mm": 10.0, "ray_length_mm": 24.0 } }, "mount2": { "measured_diameter_mm": 3.398388703664144, "probes": { "+1": { "axial_mm": null, "surface_mm": 9.999999046325684 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "ring_hits": 24, "ring_min_r_mm": 1.6991853713989258, "ring_max_r_mm": 1.6992098093032837, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -1.0, "projected_max_mm": 3.0, "approach_mm": 10.0, "ray_length_mm": 24.0 } }, "mount3": { "measured_diameter_mm": 3.3983886341253915, "probes": { "+1": { "axial_mm": null, "surface_mm": 10.0 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "ring_hits": 24, "ring_min_r_mm": 1.6991853713989258, "ring_max_r_mm": 1.6992098093032837, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -1.0, "projected_max_mm": 3.0, "approach_mm": 10.0, "ray_length_mm": 24.0 } } } }, "allowed": { "target_dims_mm": [ 284, 92, 4 ], "tol_mm": 0.05, "min_wall_mm": 1.2, "expected_shells": 1 }, "checks": [ { "name": "non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "signed_volume_positive", "status": "pass", "value": 55296.01988446546, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "bbox_dims_mm", "status": "pass", "value": [ 284.0, 92.0, 4.0 ], "limit": { "target": [ 284.0, 92.0, 4.0 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" }, { "name": "scale_applied", "status": "pass", "value": { "scale": [ 1.0, 1.0, 1.0 ], "delta_scale": [ 1.0, 1.0, 1.0 ] }, "limit": { "scale": [ 1.0, 1.0, 1.0 ] }, "note": "object scale must be 1,1,1 (apply transforms) so local mesh data equals world geometry" }, { "name": "scene_unit_system", "status": "pass", "value": "METRIC", "limit": "METRIC", "note": "non-metric units make every mm number a guess" }, { "name": "scene_scale_length", "status": "pass", "value": 1.0, "limit": 1.0, "note": "1 Blender unit must be 1 metre; the gate converts with x1000" }, { "name": "bed_fit_footprint_mm", "status": "pass", "value": [ 284.0, 92.0 ], "limit": { "bed_xy_mm": [ 320.0, 200.0 ], "brim_margin_mm": 5.0, "usable_xy_mm": [ 310.0, 190.0 ] }, "note": "sorted footprint vs sorted usable bed X/Y (bed minus 2x brim margin); 90 deg in-plane rotation allowed, diagonal placement is not; no slicer ran, this is a design-time SCREEN" }, { "name": "bed_fit_height_mm", "status": "pass", "value": 4.0, "limit": { "bed_z_mm": 100.0 }, "note": "part height (Z axis, not swappable) vs bed Z; no slicer ran" }, { "name": "bed_fit_volume_source", "status": "info", "value": "spec", "limit": null, "note": "print_volume_mm resolved from spec (part override > spec > default [256.0, 256.0, 256.0])" }, { "name": "bed_fit_a1_mini_compatible", "status": "info", "value": false, "limit": { "bed_mm": [ 180.0, 180.0, 180.0 ], "brim_margin_mm": 5.0 }, "note": "informational only, never fails the gate: does footprint + brim margin and height fit an A1 mini ([180.0, 180.0, 180.0] mm) bed" }, { "name": "wall_thickness_screen", "status": "pass", "value": { "min_mm": 1.9957, "p01_mm": 1.9957, "samples": 2252 }, "limit": { "min_wall_mm": 1.2 }, "note": "SCREEN: centroid ray sampling of faces >= 0.3 mm^2, not an exhaustive thickness proof" }, { "name": "overhang_area_pct", "status": "info", "value": 45.694, "limit": null, "note": "SCREEN: share of surface area whose normal is within 45 deg of the build-down direction. Not a printability verdict. No max_overhang_area_pct declared, so informational only." }, { "name": "feature_mount0_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 10.0 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount0_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 2.200 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount0_diameter_mm", "status": "pass", "value": 3.3984, "limit": { "target": 3.4, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount1_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 9.999999046325684 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount1_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 2.200 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount1_diameter_mm", "status": "pass", "value": 3.3984, "limit": { "target": 3.4, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount2_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 9.999999046325684 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount2_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 2.200 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount2_diameter_mm", "status": "pass", "value": 3.3984, "limit": { "target": 3.4, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount3_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 10.0 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount3_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 2.200 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount3_diameter_mm", "status": "pass", "value": 3.3984, "limit": { "target": 3.4, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "roundtrip_import", "status": "pass", "value": { "file": "RK_BASE.stl", "sha256": "40dec705f587ab82d79ead4722c2f03075ab5d211b829b601c2252e57eb23db7", "triangles": 7804 }, "limit": null, "note": "written in mm, re-parsed by Blender's STL reader" }, { "name": "roundtrip_non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "roundtrip_non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "roundtrip_wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "roundtrip_loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "roundtrip_zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "roundtrip_self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "roundtrip_shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "roundtrip_signed_volume_positive", "status": "pass", "value": 55296.019884395806, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "roundtrip_bbox_dims_mm", "status": "pass", "value": [ 284.0, 92.0, 4.0 ], "limit": { "target": [ 284.0, 92.0, 4.0 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" } ], "status": "pass" }, { "id": "RK_DIFFUSER", "object": "RK_DIFFUSER", "measured": { "non_manifold_edges": 0, "non_contiguous_edges": 0, "wire_edges": 0, "loose_verts": 0, "zero_area_faces": 0, "self_intersection_pairs": 0, "shells": 1, "signed_volume_mm3": 15552.40062166448, "surface_area_mm2": 16609.695250675082, "triangle_estimate": 822, "sample_non_manifold_edges": [], "sample_self_intersections": [], "bbox_dims_mm": [ 284.0, 92.0, 8.0 ], "bbox_deviation_mm": [ 0.0, 0.0, 0.0 ], "object_scale": [ 1.0, 1.0, 1.0 ], "object_delta_scale": [ 1.0, 1.0, 1.0 ], "unit_system": "METRIC", "scale_length": 1.0, "bed_volume_mm": [ 320.0, 200.0, 100.0 ], "footprint_mm": [ 284.0, 92.0, 8.0 ], "brim_margin_mm": 5.0, "wall_ray_samples": 1554, "wall_min_mm": 1.2999991012573242, "wall_p01_mm": 1.5991225076675415, "overhang_area_pct": 13.055979630225242, "orientation_up": "+z", "max_overhang_deg": 45.0, "features": { "mount0": { "measured_diameter_mm": 5.797241648038228, "probes": { "+1": { "axial_mm": null, "surface_mm": 11.850000381469727 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "ring_hits": 24, "ring_min_r_mm": 2.8986122608184814, "ring_max_r_mm": 2.898632287979126, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -4.0, "projected_max_mm": 4.0, "approach_mm": 10.0, "ray_length_mm": 28.0 } }, "mount1": { "measured_diameter_mm": 5.797241628170013, "probes": { "+1": { "axial_mm": null, "surface_mm": 11.84999942779541 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "ring_hits": 24, "ring_min_r_mm": 2.8986122608184814, "ring_max_r_mm": 2.898632287979126, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -4.0, "projected_max_mm": 4.0, "approach_mm": 10.0, "ray_length_mm": 28.0 } }, "mount2": { "measured_diameter_mm": 5.797241588433583, "probes": { "+1": { "axial_mm": null, "surface_mm": 11.84999942779541 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "ring_hits": 24, "ring_min_r_mm": 2.8986117839813232, "ring_max_r_mm": 2.898632287979126, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -4.0, "projected_max_mm": 4.0, "approach_mm": 10.0, "ray_length_mm": 28.0 } }, "mount3": { "measured_diameter_mm": 5.7972415288289385, "probes": { "+1": { "axial_mm": null, "surface_mm": 11.84999942779541 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "ring_hits": 24, "ring_min_r_mm": 2.8986117839813232, "ring_max_r_mm": 2.898632526397705, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -4.0, "projected_max_mm": 4.0, "approach_mm": 10.0, "ray_length_mm": 28.0 } } } }, "allowed": { "target_dims_mm": [ 284, 92, 8 ], "tol_mm": 0.05, "min_wall_mm": 1.2, "expected_shells": 1 }, "checks": [ { "name": "non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "signed_volume_positive", "status": "pass", "value": 15552.40062166448, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "bbox_dims_mm", "status": "pass", "value": [ 284.0, 92.0, 8.0 ], "limit": { "target": [ 284.0, 92.0, 8.0 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" }, { "name": "scale_applied", "status": "pass", "value": { "scale": [ 1.0, 1.0, 1.0 ], "delta_scale": [ 1.0, 1.0, 1.0 ] }, "limit": { "scale": [ 1.0, 1.0, 1.0 ] }, "note": "object scale must be 1,1,1 (apply transforms) so local mesh data equals world geometry" }, { "name": "scene_unit_system", "status": "pass", "value": "METRIC", "limit": "METRIC", "note": "non-metric units make every mm number a guess" }, { "name": "scene_scale_length", "status": "pass", "value": 1.0, "limit": 1.0, "note": "1 Blender unit must be 1 metre; the gate converts with x1000" }, { "name": "bed_fit_footprint_mm", "status": "pass", "value": [ 284.0, 92.0 ], "limit": { "bed_xy_mm": [ 320.0, 200.0 ], "brim_margin_mm": 5.0, "usable_xy_mm": [ 310.0, 190.0 ] }, "note": "sorted footprint vs sorted usable bed X/Y (bed minus 2x brim margin); 90 deg in-plane rotation allowed, diagonal placement is not; no slicer ran, this is a design-time SCREEN" }, { "name": "bed_fit_height_mm", "status": "pass", "value": 8.0, "limit": { "bed_z_mm": 100.0 }, "note": "part height (Z axis, not swappable) vs bed Z; no slicer ran" }, { "name": "bed_fit_volume_source", "status": "info", "value": "spec", "limit": null, "note": "print_volume_mm resolved from spec (part override > spec > default [256.0, 256.0, 256.0])" }, { "name": "bed_fit_a1_mini_compatible", "status": "info", "value": false, "limit": { "bed_mm": [ 180.0, 180.0, 180.0 ], "brim_margin_mm": 5.0 }, "note": "informational only, never fails the gate: does footprint + brim margin and height fit an A1 mini ([180.0, 180.0, 180.0] mm) bed" }, { "name": "wall_thickness_screen", "status": "pass", "value": { "min_mm": 1.3, "p01_mm": 1.5991, "samples": 1554 }, "limit": { "min_wall_mm": 1.2 }, "note": "SCREEN: centroid ray sampling of faces >= 0.3 mm^2, not an exhaustive thickness proof" }, { "name": "overhang_area_pct", "status": "info", "value": 13.056, "limit": null, "note": "SCREEN: share of surface area whose normal is within 45 deg of the build-down direction. Not a printability verdict. No max_overhang_area_pct declared, so informational only." }, { "name": "feature_mount0_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 11.850000381469727 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount0_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 3.400 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount0_diameter_mm", "status": "pass", "value": 5.7972, "limit": { "target": 5.8, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount1_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 11.84999942779541 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount1_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 3.400 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount1_diameter_mm", "status": "pass", "value": 5.7972, "limit": { "target": 5.8, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount2_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 11.84999942779541 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount2_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 3.400 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount2_diameter_mm", "status": "pass", "value": 5.7972, "limit": { "target": 5.8, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount3_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 11.84999942779541 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount3_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 3.400 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount3_diameter_mm", "status": "pass", "value": 5.7972, "limit": { "target": 5.8, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "roundtrip_import", "status": "pass", "value": { "file": "RK_DIFFUSER.stl", "sha256": "5490295c5c1bab78b760979904bf9b6aaefaccaa50c93961af3dd748cc5c2c9f", "triangles": 4018 }, "limit": null, "note": "written in mm, re-parsed by Blender's STL reader" }, { "name": "roundtrip_non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "roundtrip_non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "roundtrip_wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "roundtrip_loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "roundtrip_zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "roundtrip_self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "roundtrip_shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "roundtrip_signed_volume_positive", "status": "pass", "value": 15552.40062284862, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "roundtrip_bbox_dims_mm", "status": "pass", "value": [ 284.0, 92.0, 8.0 ], "limit": { "target": [ 284.0, 92.0, 8.0 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" } ], "status": "pass" }, { "id": "RK_MAIN_PLATE", "object": "RK_MAIN_PLATE", "measured": { "non_manifold_edges": 0, "non_contiguous_edges": 0, "wire_edges": 0, "loose_verts": 0, "zero_area_faces": 0, "self_intersection_pairs": 0, "shells": 1, "signed_volume_mm3": 20423.832807752406, "surface_area_mm2": 33683.60193986073, "triangle_estimate": 4252, "sample_non_manifold_edges": [], "sample_self_intersections": [], "bbox_dims_mm": [ 284.0, 92.0, 1.5 ], "bbox_deviation_mm": [ 0.0, 0.0, 0.0 ], "object_scale": [ 1.0, 1.0, 1.0 ], "object_delta_scale": [ 1.0, 1.0, 1.0 ], "unit_system": "METRIC", "scale_length": 1.0, "bed_volume_mm": [ 320.0, 200.0, 100.0 ], "footprint_mm": [ 284.0, 92.0, 1.5 ], "brim_margin_mm": 5.0, "wall_ray_samples": 3900, "wall_min_mm": 1.4999986721038818, "wall_p01_mm": 1.4999987913131714, "overhang_area_pct": 40.42283214851612, "orientation_up": "+z", "max_overhang_deg": 45.0, "features": { "mount0": { "measured_diameter_mm": 3.3983887434005737, "probes": { "+1": { "axial_mm": null, "surface_mm": 10.0 }, "-1": { "axial_mm": null, "surface_mm": 9.999999046325684 } }, "ring_hits": 24, "ring_min_r_mm": 1.6991853713989258, "ring_max_r_mm": 1.6992098093032837, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -0.6999998092651367, "projected_max_mm": 0.8000001907348633, "approach_mm": 10.0, "ray_length_mm": 21.5 } }, "mount1": { "measured_diameter_mm": 3.3983887135982513, "probes": { "+1": { "axial_mm": null, "surface_mm": 10.0 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "ring_hits": 24, "ring_min_r_mm": 1.6991853713989258, "ring_max_r_mm": 1.6992098093032837, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -0.6999998092651367, "projected_max_mm": 0.8000001907348633, "approach_mm": 10.0, "ray_length_mm": 21.5 } }, "mount2": { "measured_diameter_mm": 3.398388753334681, "probes": { "+1": { "axial_mm": null, "surface_mm": 10.000000953674316 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "ring_hits": 24, "ring_min_r_mm": 1.6991853713989258, "ring_max_r_mm": 1.6992098093032837, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -0.6999998092651367, "projected_max_mm": 0.8000001907348633, "approach_mm": 10.0, "ray_length_mm": 21.5 } }, "mount3": { "measured_diameter_mm": 3.398388683795929, "probes": { "+1": { "axial_mm": null, "surface_mm": 10.000000953674316 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "ring_hits": 24, "ring_min_r_mm": 1.6991853713989258, "ring_max_r_mm": 1.6992098093032837, "measured_keyed_flat_mm": null, "axial_probe": { "projected_min_mm": -0.6999998092651367, "projected_max_mm": 0.8000001907348633, "approach_mm": 10.0, "ray_length_mm": 21.5 } } } }, "allowed": { "target_dims_mm": [ 284, 92, 1.5 ], "tol_mm": 0.05, "min_wall_mm": 1.2, "expected_shells": 1 }, "checks": [ { "name": "non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "signed_volume_positive", "status": "pass", "value": 20423.832807752406, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "bbox_dims_mm", "status": "pass", "value": [ 284.0, 92.0, 1.5 ], "limit": { "target": [ 284.0, 92.0, 1.5 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" }, { "name": "scale_applied", "status": "pass", "value": { "scale": [ 1.0, 1.0, 1.0 ], "delta_scale": [ 1.0, 1.0, 1.0 ] }, "limit": { "scale": [ 1.0, 1.0, 1.0 ] }, "note": "object scale must be 1,1,1 (apply transforms) so local mesh data equals world geometry" }, { "name": "scene_unit_system", "status": "pass", "value": "METRIC", "limit": "METRIC", "note": "non-metric units make every mm number a guess" }, { "name": "scene_scale_length", "status": "pass", "value": 1.0, "limit": 1.0, "note": "1 Blender unit must be 1 metre; the gate converts with x1000" }, { "name": "bed_fit_footprint_mm", "status": "pass", "value": [ 284.0, 92.0 ], "limit": { "bed_xy_mm": [ 320.0, 200.0 ], "brim_margin_mm": 5.0, "usable_xy_mm": [ 310.0, 190.0 ] }, "note": "sorted footprint vs sorted usable bed X/Y (bed minus 2x brim margin); 90 deg in-plane rotation allowed, diagonal placement is not; no slicer ran, this is a design-time SCREEN" }, { "name": "bed_fit_height_mm", "status": "pass", "value": 1.5, "limit": { "bed_z_mm": 100.0 }, "note": "part height (Z axis, not swappable) vs bed Z; no slicer ran" }, { "name": "bed_fit_volume_source", "status": "info", "value": "spec", "limit": null, "note": "print_volume_mm resolved from spec (part override > spec > default [256.0, 256.0, 256.0])" }, { "name": "bed_fit_a1_mini_compatible", "status": "info", "value": false, "limit": { "bed_mm": [ 180.0, 180.0, 180.0 ], "brim_margin_mm": 5.0 }, "note": "informational only, never fails the gate: does footprint + brim margin and height fit an A1 mini ([180.0, 180.0, 180.0] mm) bed" }, { "name": "wall_thickness_screen", "status": "pass", "value": { "min_mm": 1.5, "p01_mm": 1.5, "samples": 3900 }, "limit": { "min_wall_mm": 1.2 }, "note": "SCREEN: centroid ray sampling of faces >= 0.3 mm^2, not an exhaustive thickness proof" }, { "name": "overhang_area_pct", "status": "info", "value": 40.423, "limit": null, "note": "SCREEN: share of surface area whose normal is within 45 deg of the build-down direction. Not a printability verdict. No max_overhang_area_pct declared, so informational only." }, { "name": "feature_mount0_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 10.0 }, "-1": { "axial_mm": null, "surface_mm": 9.999999046325684 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount0_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 2.200 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount0_diameter_mm", "status": "pass", "value": 3.3984, "limit": { "target": 3.4, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount1_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 10.0 }, "-1": { "axial_mm": null, "surface_mm": 10.0 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount1_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 2.200 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount1_diameter_mm", "status": "pass", "value": 3.3984, "limit": { "target": 3.4, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount2_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 10.000000953674316 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount2_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 2.200 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount2_diameter_mm", "status": "pass", "value": 3.3984, "limit": { "target": 3.4, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "feature_mount3_bore_clear", "status": "pass", "value": { "+1": { "axial_mm": null, "surface_mm": 10.000000953674316 }, "-1": { "axial_mm": null, "surface_mm": 10.000000953674316 } }, "limit": { "expect": "no axial hit (through hole)" }, "note": "a through hole must let the axial ray exit from both sides" }, { "name": "feature_mount3_material_around", "status": "pass", "value": [ true, true, true, true ], "limit": { "expect": [ true, true, true, true ] }, "note": "axial probes at radius 2.200 mm must find material on all four sides; a breakout reads as a missing wall" }, { "name": "feature_mount3_diameter_mm", "status": "pass", "value": 3.3984, "limit": { "target": 3.4, "tol": 0.05 }, "note": "mean of 24 radial first-hit distances at center_mm; roundness span 0.0000 mm" }, { "name": "roundtrip_import", "status": "pass", "value": { "file": "RK_MAIN_PLATE.stl", "sha256": "0a18a2b26d4fa5603ca42917f96718157734c3b3a362cd62c371cab88ec579db", "triangles": 17032 }, "limit": null, "note": "written in mm, re-parsed by Blender's STL reader" }, { "name": "roundtrip_non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "roundtrip_non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "roundtrip_wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "roundtrip_loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "roundtrip_zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "roundtrip_self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "roundtrip_shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "roundtrip_signed_volume_positive", "status": "pass", "value": 20423.83280901768, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "roundtrip_bbox_dims_mm", "status": "pass", "value": [ 284.0, 92.0, 1.5 ], "limit": { "target": [ 284.0, 92.0, 1.5 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" } ], "status": "pass" }, { "id": "RK_KEY_00", "object": "RK_KEY_00", "measured": { "non_manifold_edges": 0, "non_contiguous_edges": 0, "wire_edges": 0, "loose_verts": 0, "zero_area_faces": 0, "self_intersection_pairs": 0, "shells": 1, "signed_volume_mm3": 768.9688387960755, "surface_area_mm2": 1066.217682980001, "triangle_estimate": 1044, "sample_non_manifold_edges": [], "sample_self_intersections": [], "bbox_dims_mm": [ 16.199996948242188, 16.200000762939453, 9.5 ], "bbox_deviation_mm": [ -3.0517578117894573e-06, 7.629394538355427e-07, 0.0 ], "object_scale": [ 1.0, 1.0, 1.0 ], "object_delta_scale": [ 1.0, 1.0, 1.0 ], "unit_system": "METRIC", "scale_length": 1.0, "bed_volume_mm": [ 320.0, 200.0, 100.0 ], "footprint_mm": [ 16.2, 16.2, 9.5 ], "brim_margin_mm": 5.0, "wall_ray_samples": 613, "wall_min_mm": 1.0223134590148926, "wall_p01_mm": 1.0766161514282226, "overhang_area_pct": 18.831128077225863, "orientation_up": "+z", "max_overhang_deg": 45.0, "features": {} }, "allowed": { "target_dims_mm": [ 16.2, 16.2, 9.5 ], "tol_mm": 0.05, "min_wall_mm": 1.0, "expected_shells": 1 }, "checks": [ { "name": "non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "signed_volume_positive", "status": "pass", "value": 768.9688387960755, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "bbox_dims_mm", "status": "pass", "value": [ 16.2, 16.2, 9.5 ], "limit": { "target": [ 16.2, 16.2, 9.5 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [-0.0, 0.0, 0.0] mm" }, { "name": "scale_applied", "status": "pass", "value": { "scale": [ 1.0, 1.0, 1.0 ], "delta_scale": [ 1.0, 1.0, 1.0 ] }, "limit": { "scale": [ 1.0, 1.0, 1.0 ] }, "note": "object scale must be 1,1,1 (apply transforms) so local mesh data equals world geometry" }, { "name": "scene_unit_system", "status": "pass", "value": "METRIC", "limit": "METRIC", "note": "non-metric units make every mm number a guess" }, { "name": "scene_scale_length", "status": "pass", "value": 1.0, "limit": 1.0, "note": "1 Blender unit must be 1 metre; the gate converts with x1000" }, { "name": "bed_fit_footprint_mm", "status": "pass", "value": [ 16.2, 16.2 ], "limit": { "bed_xy_mm": [ 320.0, 200.0 ], "brim_margin_mm": 5.0, "usable_xy_mm": [ 310.0, 190.0 ] }, "note": "sorted footprint vs sorted usable bed X/Y (bed minus 2x brim margin); 90 deg in-plane rotation allowed, diagonal placement is not; no slicer ran, this is a design-time SCREEN" }, { "name": "bed_fit_height_mm", "status": "pass", "value": 9.5, "limit": { "bed_z_mm": 100.0 }, "note": "part height (Z axis, not swappable) vs bed Z; no slicer ran" }, { "name": "bed_fit_volume_source", "status": "info", "value": "spec", "limit": null, "note": "print_volume_mm resolved from spec (part override > spec > default [256.0, 256.0, 256.0])" }, { "name": "bed_fit_a1_mini_compatible", "status": "info", "value": true, "limit": { "bed_mm": [ 180.0, 180.0, 180.0 ], "brim_margin_mm": 5.0 }, "note": "informational only, never fails the gate: does footprint + brim margin and height fit an A1 mini ([180.0, 180.0, 180.0] mm) bed" }, { "name": "wall_thickness_screen", "status": "pass", "value": { "min_mm": 1.0223, "p01_mm": 1.0766, "samples": 613 }, "limit": { "min_wall_mm": 1.0 }, "note": "SCREEN: centroid ray sampling of faces >= 0.3 mm^2, not an exhaustive thickness proof" }, { "name": "overhang_area_pct", "status": "info", "value": 18.831, "limit": null, "note": "SCREEN: share of surface area whose normal is within 45 deg of the build-down direction. Not a printability verdict. No max_overhang_area_pct declared, so informational only." }, { "name": "roundtrip_import", "status": "pass", "value": { "file": "RK_KEY_00.stl", "sha256": "83d9735d524fb4b3738dce3f3846f587b841e6616186339e5ee3078a5505acce", "triangles": 1920 }, "limit": null, "note": "written in mm, re-parsed by Blender's STL reader" }, { "name": "roundtrip_non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "roundtrip_non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "roundtrip_wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "roundtrip_loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "roundtrip_zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "roundtrip_self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "roundtrip_shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "roundtrip_signed_volume_positive", "status": "pass", "value": 769.0643086907377, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "roundtrip_bbox_dims_mm", "status": "pass", "value": [ 16.2, 16.2, 9.5 ], "limit": { "target": [ 16.2, 16.2, 9.5 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [-0.0, 0.0, 0.0] mm" } ], "status": "pass" }, { "id": "RK_KEY_41", "object": "RK_KEY_41", "measured": { "non_manifold_edges": 0, "non_contiguous_edges": 0, "wire_edges": 0, "loose_verts": 0, "zero_area_faces": 0, "self_intersection_pairs": 0, "shells": 1, "signed_volume_mm3": 1382.019037276387, "surface_area_mm2": 2025.2036349242553, "triangle_estimate": 1264, "sample_non_manifold_edges": [], "sample_self_intersections": [], "bbox_dims_mm": [ 35.0, 16.19999885559082, 9.5 ], "bbox_deviation_mm": [ 0.0, -1.1444091789769573e-06, 0.0 ], "object_scale": [ 1.0, 1.0, 1.0 ], "object_delta_scale": [ 1.0, 1.0, 1.0 ], "unit_system": "METRIC", "scale_length": 1.0, "bed_volume_mm": [ 320.0, 200.0, 100.0 ], "footprint_mm": [ 35.0, 16.2, 9.5 ], "brim_margin_mm": 5.0, "wall_ray_samples": 823, "wall_min_mm": 1.022312266921997, "wall_p01_mm": 1.0766241384506225, "overhang_area_pct": 23.140834598225798, "orientation_up": "+z", "max_overhang_deg": 45.0, "features": {} }, "allowed": { "target_dims_mm": [ 35, 16.2, 9.5 ], "tol_mm": 0.05, "min_wall_mm": 1.0, "expected_shells": 1 }, "checks": [ { "name": "non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "signed_volume_positive", "status": "pass", "value": 1382.019037276387, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "bbox_dims_mm", "status": "pass", "value": [ 35.0, 16.2, 9.5 ], "limit": { "target": [ 35.0, 16.2, 9.5 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, -0.0, 0.0] mm" }, { "name": "scale_applied", "status": "pass", "value": { "scale": [ 1.0, 1.0, 1.0 ], "delta_scale": [ 1.0, 1.0, 1.0 ] }, "limit": { "scale": [ 1.0, 1.0, 1.0 ] }, "note": "object scale must be 1,1,1 (apply transforms) so local mesh data equals world geometry" }, { "name": "scene_unit_system", "status": "pass", "value": "METRIC", "limit": "METRIC", "note": "non-metric units make every mm number a guess" }, { "name": "scene_scale_length", "status": "pass", "value": 1.0, "limit": 1.0, "note": "1 Blender unit must be 1 metre; the gate converts with x1000" }, { "name": "bed_fit_footprint_mm", "status": "pass", "value": [ 35.0, 16.2 ], "limit": { "bed_xy_mm": [ 320.0, 200.0 ], "brim_margin_mm": 5.0, "usable_xy_mm": [ 310.0, 190.0 ] }, "note": "sorted footprint vs sorted usable bed X/Y (bed minus 2x brim margin); 90 deg in-plane rotation allowed, diagonal placement is not; no slicer ran, this is a design-time SCREEN" }, { "name": "bed_fit_height_mm", "status": "pass", "value": 9.5, "limit": { "bed_z_mm": 100.0 }, "note": "part height (Z axis, not swappable) vs bed Z; no slicer ran" }, { "name": "bed_fit_volume_source", "status": "info", "value": "spec", "limit": null, "note": "print_volume_mm resolved from spec (part override > spec > default [256.0, 256.0, 256.0])" }, { "name": "bed_fit_a1_mini_compatible", "status": "info", "value": true, "limit": { "bed_mm": [ 180.0, 180.0, 180.0 ], "brim_margin_mm": 5.0 }, "note": "informational only, never fails the gate: does footprint + brim margin and height fit an A1 mini ([180.0, 180.0, 180.0] mm) bed" }, { "name": "wall_thickness_screen", "status": "pass", "value": { "min_mm": 1.0223, "p01_mm": 1.0766, "samples": 823 }, "limit": { "min_wall_mm": 1.0 }, "note": "SCREEN: centroid ray sampling of faces >= 0.3 mm^2, not an exhaustive thickness proof" }, { "name": "overhang_area_pct", "status": "info", "value": 23.141, "limit": null, "note": "SCREEN: share of surface area whose normal is within 45 deg of the build-down direction. Not a printability verdict. No max_overhang_area_pct declared, so informational only." }, { "name": "roundtrip_import", "status": "pass", "value": { "file": "RK_KEY_41.stl", "sha256": "a525cfb91f03dd25cb971a061a54b063a7cad772833355b7d23ad4fe7fe139e1", "triangles": 2688 }, "limit": null, "note": "written in mm, re-parsed by Blender's STL reader" }, { "name": "roundtrip_non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "roundtrip_non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "roundtrip_wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "roundtrip_loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "roundtrip_zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "roundtrip_self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "roundtrip_shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "roundtrip_signed_volume_positive", "status": "pass", "value": 1382.1022896167835, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "roundtrip_bbox_dims_mm", "status": "pass", "value": [ 35.0, 16.2, 9.5 ], "limit": { "target": [ 35.0, 16.2, 9.5 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, -0.0, 0.0] mm" } ], "status": "pass" }, { "id": "RK_KNOB_1", "object": "RK_KNOB_1", "measured": { "non_manifold_edges": 0, "non_contiguous_edges": 0, "wire_edges": 0, "loose_verts": 0, "zero_area_faces": 0, "self_intersection_pairs": 0, "shells": 1, "signed_volume_mm3": 2576.3039158490274, "surface_area_mm2": 1730.151637122035, "triangle_estimate": 1080, "sample_non_manifold_edges": [], "sample_self_intersections": [], "bbox_dims_mm": [ 16.0, 16.0, 18.0 ], "bbox_deviation_mm": [ 0.0, 0.0, 0.0 ], "object_scale": [ 1.0, 1.0, 1.0 ], "object_delta_scale": [ 1.0, 1.0, 1.0 ], "unit_system": "METRIC", "scale_length": 1.0, "bed_volume_mm": [ 320.0, 200.0, 100.0 ], "footprint_mm": [ 16.0, 16.0, 18.0 ], "brim_margin_mm": 5.0, "wall_ray_samples": 1012, "wall_min_mm": 1.2000014616012573, "wall_p01_mm": 1.2000015808105469, "overhang_area_pct": 10.61883803938026, "orientation_up": "+z", "max_overhang_deg": 45.0, "features": {} }, "allowed": { "target_dims_mm": [ 16, 16, 18 ], "tol_mm": 0.05, "min_wall_mm": 1.1, "expected_shells": 1 }, "checks": [ { "name": "non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "signed_volume_positive", "status": "pass", "value": 2576.3039158490274, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "bbox_dims_mm", "status": "pass", "value": [ 16.0, 16.0, 18.0 ], "limit": { "target": [ 16.0, 16.0, 18.0 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" }, { "name": "scale_applied", "status": "pass", "value": { "scale": [ 1.0, 1.0, 1.0 ], "delta_scale": [ 1.0, 1.0, 1.0 ] }, "limit": { "scale": [ 1.0, 1.0, 1.0 ] }, "note": "object scale must be 1,1,1 (apply transforms) so local mesh data equals world geometry" }, { "name": "scene_unit_system", "status": "pass", "value": "METRIC", "limit": "METRIC", "note": "non-metric units make every mm number a guess" }, { "name": "scene_scale_length", "status": "pass", "value": 1.0, "limit": 1.0, "note": "1 Blender unit must be 1 metre; the gate converts with x1000" }, { "name": "bed_fit_footprint_mm", "status": "pass", "value": [ 16.0, 16.0 ], "limit": { "bed_xy_mm": [ 320.0, 200.0 ], "brim_margin_mm": 5.0, "usable_xy_mm": [ 310.0, 190.0 ] }, "note": "sorted footprint vs sorted usable bed X/Y (bed minus 2x brim margin); 90 deg in-plane rotation allowed, diagonal placement is not; no slicer ran, this is a design-time SCREEN" }, { "name": "bed_fit_height_mm", "status": "pass", "value": 18.0, "limit": { "bed_z_mm": 100.0 }, "note": "part height (Z axis, not swappable) vs bed Z; no slicer ran" }, { "name": "bed_fit_volume_source", "status": "info", "value": "spec", "limit": null, "note": "print_volume_mm resolved from spec (part override > spec > default [256.0, 256.0, 256.0])" }, { "name": "bed_fit_a1_mini_compatible", "status": "info", "value": true, "limit": { "bed_mm": [ 180.0, 180.0, 180.0 ], "brim_margin_mm": 5.0 }, "note": "informational only, never fails the gate: does footprint + brim margin and height fit an A1 mini ([180.0, 180.0, 180.0] mm) bed" }, { "name": "wall_thickness_screen", "status": "pass", "value": { "min_mm": 1.2, "p01_mm": 1.2, "samples": 1012 }, "limit": { "min_wall_mm": 1.1 }, "note": "SCREEN: centroid ray sampling of faces >= 0.3 mm^2, not an exhaustive thickness proof" }, { "name": "overhang_area_pct", "status": "info", "value": 10.619, "limit": null, "note": "SCREEN: share of surface area whose normal is within 45 deg of the build-down direction. Not a printability verdict. No max_overhang_area_pct declared, so informational only." }, { "name": "roundtrip_import", "status": "pass", "value": { "file": "RK_KNOB_1.stl", "sha256": "f545256eae56984df88d2b73b60c732a6a305ca1f8e64b8be918812d92df1c4d", "triangles": 1962 }, "limit": null, "note": "written in mm, re-parsed by Blender's STL reader" }, { "name": "roundtrip_non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "roundtrip_non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "roundtrip_wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "roundtrip_loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "roundtrip_zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "roundtrip_self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "roundtrip_shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "roundtrip_signed_volume_positive", "status": "pass", "value": 2576.3068558908626, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "roundtrip_bbox_dims_mm", "status": "pass", "value": [ 16.0, 16.0, 18.0 ], "limit": { "target": [ 16.0, 16.0, 18.0 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" } ], "status": "pass" }, { "id": "RK_FOOT_0", "object": "RK_FOOT_0", "measured": { "non_manifold_edges": 0, "non_contiguous_edges": 0, "wire_edges": 0, "loose_verts": 0, "zero_area_faces": 0, "self_intersection_pairs": 0, "shells": 1, "signed_volume_mm3": 133.06104887532993, "surface_area_mm2": 202.175732254982, "triangle_estimate": 54, "sample_non_manifold_edges": [], "sample_self_intersections": [], "bbox_dims_mm": [ 14.0, 5.0, 2.0 ], "bbox_deviation_mm": [ 0.0, 0.0, 0.0 ], "object_scale": [ 1.0, 1.0, 1.0 ], "object_delta_scale": [ 1.0, 1.0, 1.0 ], "unit_system": "METRIC", "scale_length": 1.0, "bed_volume_mm": [ 320.0, 200.0, 100.0 ], "footprint_mm": [ 14.0, 5.0, 2.0 ], "brim_margin_mm": 5.0, "wall_ray_samples": 29, "wall_min_mm": 1.9999998641967773, "wall_p01_mm": 1.9999998641967773, "overhang_area_pct": 32.90724531095341, "orientation_up": "+z", "max_overhang_deg": 45.0, "features": {} }, "allowed": { "target_dims_mm": [ 14, 5, 2 ], "tol_mm": 0.05, "min_wall_mm": 1.2, "expected_shells": 1 }, "checks": [ { "name": "non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "signed_volume_positive", "status": "pass", "value": 133.06104887532993, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "bbox_dims_mm", "status": "pass", "value": [ 14.0, 5.0, 2.0 ], "limit": { "target": [ 14.0, 5.0, 2.0 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" }, { "name": "scale_applied", "status": "pass", "value": { "scale": [ 1.0, 1.0, 1.0 ], "delta_scale": [ 1.0, 1.0, 1.0 ] }, "limit": { "scale": [ 1.0, 1.0, 1.0 ] }, "note": "object scale must be 1,1,1 (apply transforms) so local mesh data equals world geometry" }, { "name": "scene_unit_system", "status": "pass", "value": "METRIC", "limit": "METRIC", "note": "non-metric units make every mm number a guess" }, { "name": "scene_scale_length", "status": "pass", "value": 1.0, "limit": 1.0, "note": "1 Blender unit must be 1 metre; the gate converts with x1000" }, { "name": "bed_fit_footprint_mm", "status": "pass", "value": [ 14.0, 5.0 ], "limit": { "bed_xy_mm": [ 320.0, 200.0 ], "brim_margin_mm": 5.0, "usable_xy_mm": [ 310.0, 190.0 ] }, "note": "sorted footprint vs sorted usable bed X/Y (bed minus 2x brim margin); 90 deg in-plane rotation allowed, diagonal placement is not; no slicer ran, this is a design-time SCREEN" }, { "name": "bed_fit_height_mm", "status": "pass", "value": 2.0, "limit": { "bed_z_mm": 100.0 }, "note": "part height (Z axis, not swappable) vs bed Z; no slicer ran" }, { "name": "bed_fit_volume_source", "status": "info", "value": "spec", "limit": null, "note": "print_volume_mm resolved from spec (part override > spec > default [256.0, 256.0, 256.0])" }, { "name": "bed_fit_a1_mini_compatible", "status": "info", "value": true, "limit": { "bed_mm": [ 180.0, 180.0, 180.0 ], "brim_margin_mm": 5.0 }, "note": "informational only, never fails the gate: does footprint + brim margin and height fit an A1 mini ([180.0, 180.0, 180.0] mm) bed" }, { "name": "wall_thickness_screen", "status": "pass", "value": { "min_mm": 2.0, "p01_mm": 2.0, "samples": 29 }, "limit": { "min_wall_mm": 1.2 }, "note": "SCREEN: centroid ray sampling of faces >= 0.3 mm^2, not an exhaustive thickness proof" }, { "name": "overhang_area_pct", "status": "info", "value": 32.907, "limit": null, "note": "SCREEN: share of surface area whose normal is within 45 deg of the build-down direction. Not a printability verdict. No max_overhang_area_pct declared, so informational only." }, { "name": "roundtrip_import", "status": "pass", "value": { "file": "RK_FOOT_0.stl", "sha256": "d56a76fae8b658e4706913c897cdc12f84ac1f8f152ba94a95ccdd6660d3298a", "triangles": 204 }, "limit": null, "note": "written in mm, re-parsed by Blender's STL reader" }, { "name": "roundtrip_non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "roundtrip_non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "roundtrip_wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "roundtrip_loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "roundtrip_zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "roundtrip_self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "roundtrip_shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "roundtrip_signed_volume_positive", "status": "pass", "value": 133.06104887533002, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "roundtrip_bbox_dims_mm", "status": "pass", "value": [ 14.0, 5.0, 2.0 ], "limit": { "target": [ 14.0, 5.0, 2.0 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, 0.0] mm" } ], "status": "pass" }, { "id": "RK_GUIDE_SLEEVE_0", "object": "RK_GUIDE_SLEEVE_0", "measured": { "non_manifold_edges": 0, "non_contiguous_edges": 0, "wire_edges": 0, "loose_verts": 0, "zero_area_faces": 0, "self_intersection_pairs": 0, "shells": 1, "signed_volume_mm3": 105.69879729395078, "surface_area_mm2": 218.71517017122824, "triangle_estimate": 1056, "sample_non_manifold_edges": [], "sample_self_intersections": [], "bbox_dims_mm": [ 6.0, 6.0, 7.899999618530273 ], "bbox_deviation_mm": [ 0.0, 0.0, -3.8146972691777137e-07 ], "object_scale": [ 1.0, 1.0, 1.0 ], "object_delta_scale": [ 1.0, 1.0, 1.0 ], "unit_system": "METRIC", "scale_length": 1.0, "bed_volume_mm": [ 320.0, 200.0, 100.0 ], "footprint_mm": [ 6.0, 6.0, 7.9 ], "brim_margin_mm": 5.0, "wall_ray_samples": 192, "wall_min_mm": 1.0994051528930664, "wall_p01_mm": 1.099405272102356, "overhang_area_pct": 11.181435079387134, "orientation_up": "+z", "max_overhang_deg": 45.0, "features": {} }, "allowed": { "target_dims_mm": [ 6, 6, 7.9 ], "tol_mm": 0.05, "min_wall_mm": 1.0, "expected_shells": 1 }, "checks": [ { "name": "non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "signed_volume_positive", "status": "pass", "value": 105.69879729395078, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "bbox_dims_mm", "status": "pass", "value": [ 6.0, 6.0, 7.9 ], "limit": { "target": [ 6.0, 6.0, 7.9 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, -0.0] mm" }, { "name": "scale_applied", "status": "pass", "value": { "scale": [ 1.0, 1.0, 1.0 ], "delta_scale": [ 1.0, 1.0, 1.0 ] }, "limit": { "scale": [ 1.0, 1.0, 1.0 ] }, "note": "object scale must be 1,1,1 (apply transforms) so local mesh data equals world geometry" }, { "name": "scene_unit_system", "status": "pass", "value": "METRIC", "limit": "METRIC", "note": "non-metric units make every mm number a guess" }, { "name": "scene_scale_length", "status": "pass", "value": 1.0, "limit": 1.0, "note": "1 Blender unit must be 1 metre; the gate converts with x1000" }, { "name": "bed_fit_footprint_mm", "status": "pass", "value": [ 6.0, 6.0 ], "limit": { "bed_xy_mm": [ 320.0, 200.0 ], "brim_margin_mm": 5.0, "usable_xy_mm": [ 310.0, 190.0 ] }, "note": "sorted footprint vs sorted usable bed X/Y (bed minus 2x brim margin); 90 deg in-plane rotation allowed, diagonal placement is not; no slicer ran, this is a design-time SCREEN" }, { "name": "bed_fit_height_mm", "status": "pass", "value": 7.9, "limit": { "bed_z_mm": 100.0 }, "note": "part height (Z axis, not swappable) vs bed Z; no slicer ran" }, { "name": "bed_fit_volume_source", "status": "info", "value": "spec", "limit": null, "note": "print_volume_mm resolved from spec (part override > spec > default [256.0, 256.0, 256.0])" }, { "name": "bed_fit_a1_mini_compatible", "status": "info", "value": true, "limit": { "bed_mm": [ 180.0, 180.0, 180.0 ], "brim_margin_mm": 5.0 }, "note": "informational only, never fails the gate: does footprint + brim margin and height fit an A1 mini ([180.0, 180.0, 180.0] mm) bed" }, { "name": "wall_thickness_screen", "status": "pass", "value": { "min_mm": 1.0994, "p01_mm": 1.0994, "samples": 192 }, "limit": { "min_wall_mm": 1.0 }, "note": "SCREEN: centroid ray sampling of faces >= 0.3 mm^2, not an exhaustive thickness proof" }, { "name": "overhang_area_pct", "status": "info", "value": 11.181, "limit": null, "note": "SCREEN: share of surface area whose normal is within 45 deg of the build-down direction. Not a printability verdict. No max_overhang_area_pct declared, so informational only." }, { "name": "roundtrip_import", "status": "pass", "value": { "file": "RK_GUIDE_SLEEVE_0.stl", "sha256": "dbad7cd844bf12b2bcc8b8b52cf29d5c9dd98cf920307625b29ab83936c8cff7", "triangles": 2304 }, "limit": null, "note": "written in mm, re-parsed by Blender's STL reader" }, { "name": "roundtrip_non_manifold_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges not shared by exactly two faces; the solid is not watertight" }, { "name": "roundtrip_non_contiguous_edges", "status": "pass", "value": 0, "limit": 0, "note": "manifold edges whose two faces disagree on winding: inverted normals" }, { "name": "roundtrip_wire_edges", "status": "pass", "value": 0, "limit": 0, "note": "edges with no face" }, { "name": "roundtrip_loose_verts", "status": "pass", "value": 0, "limit": 0, "note": "vertices with no edge" }, { "name": "roundtrip_zero_area_faces", "status": "pass", "value": 0, "limit": 0, "note": "faces at or below 1e-08 mm^2" }, { "name": "roundtrip_self_intersection_pairs", "status": "pass", "value": 0, "limit": 0, "note": "non-adjacent triangle pairs whose bounds overlap (BVH); capped at 200" }, { "name": "roundtrip_shells", "status": "pass", "value": 1, "limit": 1, "note": "separate closed surfaces" }, { "name": "roundtrip_signed_volume_positive", "status": "pass", "value": 105.69879739112788, "limit": { "min_exclusive": 0.0 }, "note": "negative or zero volume means the surface is inverted or open" }, { "name": "roundtrip_bbox_dims_mm", "status": "pass", "value": [ 6.0, 6.0, 7.9 ], "limit": { "target": [ 6.0, 6.0, 7.9 ], "tol": 0.05 }, "note": "world-space axis-aligned bounding box; deviation [0.0, 0.0, -0.0] mm" } ], "status": "pass" } ], "failed": [], "required_checks_missing": [], "exclusions": [ "load capacity: not evaluated (no FEA, no coupon test)", "print success: not evaluated (no slicer run, no support/adhesion analysis)", "assembly fit: not evaluated (no mating-part interference study)", "thermal / creep behaviour: not evaluated", "surface finish and printer-specific shrinkage: not evaluated", "wall-thickness and overhang results are RAY SCREENS, not exhaustive proofs", "declared load_case not evaluated: {'description': 'Representative keyboard housing/controls; no physical load contract qualified'}", "physical evidence still owed: The 320x200x100 envelope is a required prototype workspace, not a verified available printer.", "physical evidence still owed: Confirm exact switches, keycap retention and shaft D-flat before machining/printing functional controls.", "physical evidence still owed: Confirm PCB/electrical isolation, standoffs, screw engagement and physical assembly.", "physical evidence still owed: No material, load, thermal, optical, electrical or device-function qualification." ], "coverage": { "checked": [ "bbox_dims_mm", "bed_fit_footprint_mm", "bed_fit_height_mm", "feature_mount0_bore_clear", "feature_mount0_diameter_mm", "feature_mount0_material_around", "feature_mount1_bore_clear", "feature_mount1_diameter_mm", "feature_mount1_material_around", "feature_mount2_bore_clear", "feature_mount2_diameter_mm", "feature_mount2_material_around", "feature_mount3_bore_clear", "feature_mount3_diameter_mm", "feature_mount3_material_around", "loose_verts", "non_contiguous_edges", "non_manifold_edges", "roundtrip_bbox_dims_mm", "roundtrip_import", "roundtrip_loose_verts", "roundtrip_non_contiguous_edges", "roundtrip_non_manifold_edges", "roundtrip_self_intersection_pairs", "roundtrip_shells", "roundtrip_signed_volume_positive", "roundtrip_wire_edges", "roundtrip_zero_area_faces", "scale_applied", "scene_scale_length", "scene_unit_system", "self_intersection_pairs", "shells", "signed_volume_positive", "wall_thickness_screen", "wire_edges", "zero_area_faces" ], "unchecked": [ "part RK_BASE: overhang reported but not gated (no max_overhang_area_pct)", "part RK_DIFFUSER: overhang reported but not gated (no max_overhang_area_pct)", "part RK_FOOT_0: no features declared, so no bore was measured", "part RK_FOOT_0: overhang reported but not gated (no max_overhang_area_pct)", "part RK_GUIDE_SLEEVE_0: no features declared, so no bore was measured", "part RK_GUIDE_SLEEVE_0: overhang reported but not gated (no max_overhang_area_pct)", "part RK_KEY_00: no features declared, so no bore was measured", "part RK_KEY_00: overhang reported but not gated (no max_overhang_area_pct)", "part RK_KEY_41: no features declared, so no bore was measured", "part RK_KEY_41: overhang reported but not gated (no max_overhang_area_pct)", "part RK_KNOB_1: no features declared, so no bore was measured", "part RK_KNOB_1: overhang reported but not gated (no max_overhang_area_pct)", "part RK_MAIN_PLATE: overhang reported but not gated (no max_overhang_area_pct)" ] }, "duration_s": 0.416, "timestamp": "2026-09-17T12:11:18Z" }